Lexmark CS310 Series, User Manual

Page: 135 / 188

Remove packaging material, check all
1
Remove any remaining packing material from the specified location.
2
From the printer control panel, press to clear the message and continue printing.
Remove paper from standard output bin
Remove the paper stack from the standard bin.
Replace maintenance kit [80.xy]
The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or
contact your service representative, and then report the message.
Replace missing [color] cartridge [31.xy]
Install the indicated toner cartridge to clear the message. For more information, see the “Replacing supplies”
section of the
User’s Guide .
Replace missing [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the “Replacing supplies”
section of the
User’s Guide .
Replace missing waste toner bottle [31.xyz]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet
that came with the supply.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see
the instruction sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the
User’s Guide or visit www.lexmark.com .
Replace unsupported [color] cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message.
Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s
Guide or visit www.lexmark.com .
Troubleshooting 135