HUBBLE series
System Administrator’s
Manual
73
Network Settings
There are two network interface cards in NVR. Either of these cards can be supported by the
built-in DHCP server feature, which enables NVR to assign IP addresses to cameras via
WAN
or
LAN
port without another DHCP on the router.
To access the current settings of the Ethernet ports, go to
System
Setup
page
→
Network
tab
→
Information
.
By default,
WAN
card is set to
Manual
mode with a fixed IP address
192.168.0.10
, while
LAN
is in
DHCP
client mode.
