HUBBLE series
System Administrator’s
Manual
35
Change POS Settings
After the devices are added, you may change their properties on
the
Device Settings
page.
To access the
Device Settings
page, right-click on the channel and click
Setup
.
Click the page tab to access the corresponding functions like
POS
,
Event
, and
Schedule
setup.
On the
POS
page, you can modify the configurations previously set when adding a POS
system. The GPS Position can also be enabled and configure here. After modifying any
settings
, click “
Apply
” to save.
Configure POS Event and Schedule
Event rules become active or inactive based upon a weekly or specific schedule. By default,
the POS system is enabled to record full time with event handling. The event-handling
schedule of each POS system is enabled for 24 hours once it is added to the NVR system.
To configure the
Event Handling Schedule
, on the
Live
screen, right-click on the POS
device to display the pop-up menu, then click
Setup
. Select the “
Schedule”
tab. Select Drag
on the 24-hour time table.
