LevelOne HUBBLE Series, System Administrator Manual

Page: 79 / 92

HUBBLE series System Administrator’s Manual
79
Enable Network Address Translation (NAT)
Enable Network Address Translation (NAT) to allow NVR to assign a public address to a
network device.
1. Go to System Setup page
→
Network tab
→ click “ NAT ”.
2.
Click “ Scan ” to list the devices on the network and assign an address. Or, to manually
add a device, click “ Add ”, then input the required fields.
3.
Check “ Enable ” to enable NAT on a particular device.
4.
Click “ Save ” to save the settings.