HUBBLE series
System Administrator’s
Manual
55
Event-Recording File Length
Before setting the recording schedule, you may define the length of an event recording. To do
this, configure the following properties shown as below, which will make an event recording
as long as 10+30 second:
Field
Description
Recycle Days
NVR always records data into the HDD, when the HDD is full, it then
deletes the oldest data by default to save the new recordings. If
Recycle Days
is enabled, NVR will only maintain the last specified
days even if the HDD still has empty spaces.
Pre-event Recording
Buffer (sec)
:
NVR keeps a short cache of video received from devices. If an event
is triggered, NVR will automatically store the pre-event buffer along
with the recording of the event itself.
NOTE:
Function available only on cameras.
Post-event Recording
Buffer (sec):
This will determine how long after the event is triggered should be
included in the event recording file.
NOTE:
Function available only on cameras.
Set the Recording Schedule
On the time table
1.
Click on the recording mode from
Recording Schedule
.
Field
Description
Full-Time Recording
Continuously record at the video frame rate you define in
Camera
Settings
.
Event Speed Up
Recording
Continuously record everything at 1FPS, when an event occurs, the
frame rate will switch to the value you define in
Camera Settings
,
and automatically switch back to 1FPS after the event ends.
NOTE:
Function available only on cameras.
