HUBBLE series
System Administrator’s
Manual
45
Access Control
The NVR user interface also allows you to add access control devices.
Add Access Control Device
1.
On the
Live
page, click
Add > Add Access Control
. The
Access Control
pop-up
appears.
2.
Input the necessary fields as below:
a.
Name
: Type the desired POS name to identify this device.
b.
Brand
: Select the access control device brand name. Depending on the device
brand, the succeeding fields may vary.
c.
Server Address
: Type the IP address of the access control device.
d.
Port
: Type the COM Port to which the device is connected.
e.
Polling Interval (Secs)
: The amount of time to display the transaction entries on
the camera view.
f.
Device ID
: Type the ID to assign to the device.
g.
Account
and
Password
: If required by the device, type the Account or User
Name and Password to access the access control device.
3.
Click
Add
to save the settings.
1
2
3
