HUBBLE series
System Administrator’s
Manual
43
Configure Network IO Event and Schedule
Event rules become active or inactive based upon a weekly or specific schedule. By default,
the network IO is enabled to record full time with event handling. The event-handling
schedule of each network IO is enabled for 24 hours once it is added to the NVR system. To
configure the
Event Handling Schedule
, on the
Live
screen, right-click on the device to
display the pop-up menu, then click
Setup
. Select the “
Schedule”
tab.
Select recording with or without event handling then drag on the 24-hour time table. You can
also check
Duration
to set a range of dates for recording.
Set Event Rules
On the
Live
screen, right-click on the device to display the pop-up menu, then click
Setup
→
Event
.
Once a device is added to the NVR server, the server would provide empty rules with
compatible trigger types for you to configure. Available network IO triggers are the following:
DI (port number) ON, DI (port number) OFF
, etc.
To configure the event response, double-click on the corresponding
Edit
icon. The
Event and Action
window appears. Click on the corresponding page tab to configure the
event response. For more details about setting event rules, see
on page 58.