LevelOne HUBBLE Series, System Administrator Manual

Page: 58 / 92

HUBBLE series System Administrator’s Manual
58
Set Event Rules
On the Live screen, right-click on the camera to display the pop-up menu, then click Setup →
Event .
Once a device is added to the NVR server, the server would provide empty rules with
compatible trigger types for you to configure such as MotionDetected_1, MotionDetected_2 ,
MotionDetected_3 , NetworkLoss , Network Recovery , TamperingDetection , and others.
Available events vary depending on the camera models or device type.
To configure the event response, double-click on the corresponding Edit icon. The
Event and Action window appears. Click on the corresponding page tab to configure the
event response.
Beep
When enabled, the NVR will beep for a period of time when the event is triggered. On the
Beep tab ,
check “ Enable ” to enable this function. Input the duration time and repeat times of
the beep. Click “ Save ” to confirm.