59
PARAMETERS
These parameters are displayed:
◆
Mode
– Enables or disables filtering of management access based on configured IP
addresses. (Default: Disabled)
◆
Start IP Address
– The starting address of a range.
◆
End IP Address
– The ending address of a range.
◆
HTTP/HTTPS
– Filters IP addresses for access to the web interface over standard HTTP,
or over HTTPS which uses the Secure Socket Layer (SSL) protocol to provide an
encrypted connection.
◆
SNMP
– Filters IP addresses for access through SNMP.
◆
TELNET / SSH
– Filters IP addresses for access through Telnet, or through Secure Shell
which provides authentication and encryption.
WEB INTERFACE
To configure addresses allowed access to management interfaces on the switch:
1. Click Configuration, Security, Switch, Access Management.
2. Set the Mode to Enabled.
3. Click “Add new entry.”
4. Enter the start and end of an address range.
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...