56
◆
SSH service on this switch only supports password authentication. The password can be
authenticated either locally or via a RADIUS or remote authentication server,
as specified on the Auth Method menu (page 52).
To use SSH with password authentication, the host public key must still be given to the
client, either during initial connection or manually entered into the known host file.
However, you do not need to configure the client's keys.
◆
The SSH service on the switch supports up to four client sessions. The maximum number
of client sessions includes both current Telnet sessions and SSH sessions.
PARAMETERS
These parameters are displayed:
◆
Mode - Allows you to enable/disable SSH service on the switch.
(Default: Enabled)
WEB INTERFACE
To configure SSH:
1. Click Configuration, Security, Switch, SSH.
2. Enable SSH if required.
3. Click Save.
HTTPS Configuration
Use the HTTPS Configuration page to enable the Secure Hypertext Transfer Protocol
(HTTPS) over the Secure Socket Layer (SSL). HTTPS provides secure access (i.e., an
encrypted connection) to the switch's web interface.
PATH
Configuration \ Security \ Switch \ HTTPS
Figure 17: HTTPS Configuration
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...