163
◆
Maximum Power -The maximum power that can be delivered to a remote device. (Range:
0-34.2 Watts depending on the PoE mode)
WEB INTERFACE
To configure global and port-specific PoE settings:
1. Click Configuration, PoE, configuration.
2. Set the global PoE parameters, including the method used to determinereserved port
power, the method by which port power is shut down, and the
switch’s overall power
budget.
3. Specify the port PoE operating mode, port power allocation priority, and the port power
budget.
4. Click Save.
PoE Scheduling
This page allows the user to set the date and time for enabling or disabling PoE function on
per-port basis for the switch. Note the PoE scheduling function is working only when the
NTP sync time server is enabled. Please make sure the NTP is enabled for PoE scheduling.
PATH
Configuration \ PoE \ Scheduling
Figure 64: Configuring PoE Scheduling
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...
