258
Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast)
information. This table is sorted first by VLAN ID, then by group, and then by Port. Different
source addresses belong to the same group are treated as a single entry.
Each page shows up to 99 entries, at default being 20, from the MVR SFM Information table
selected through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the MVR SFM Information Table.
PATH
Monitor \ MVR \ MVR SFM Information
Figure 127: MVR SFM Information
PARAMETERS
The "Start from VLAN", and "Group Address" input fields allow the user to select the starting
point in the MVR SFM Information Table.
◆
VLAN ID
– The VLAN ID of the group.
◆
Groups
– The groups ID of the group displayed.
◆
Port
– The switch port number.
◆
Mode
– Indicate the filtering mode maintained per (VLAN ID, port number, Group Address)
basis. It can be either Include or Exclude.
◆
Source Address
– IP Address of the source. Currently, system limits the total number of
IP source addresses for filtering to be 128. When there is not any source filtering address,
the text "None" is shown in the Source Address field.
◆
Type
– The type can be either Allow or Deny.
◆
Hardware Filter/Switch
– Indicates whether data plane destined to the specific group
address from the source IPv4/IPv6 address could be handled by chip or not.
WEB INTERFACE
To display information for MVR channel groups, click Monitor, MVR, and MVR SFM
Information.
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...
