142
To configure global and port-related settings for IGMP Snooping:
1. Click Configuration, IPMC, IGMP Snooping, Basic Configuration.
2. Adjust the IGMP settings as required.
3. Click Save.
VLAN Configuration for IGMP Snooping
Use the IGMP Snooping VLAN Configuration page to configure IGMP snooping and query for
a VLAN interface
PATH
Configuration \ IPMC \ IGMP Snooping \ VLAN Configuration
Figure 56: Configuring VLAN Settings for IGMP Snooping and Query
PARAMETERS
These parameters are displayed:
◆
VLAN ID
– VLAN Identifier.
◆
Snooping Enabled
– When enabled, the switch will monitor network traffic on the
indicated VLAN interface to determine which hosts want to receive multicast traffic.
(Default: Enabled) When IGMP snooping is enabled globally, the per VLAN interface
settings for IGMP snooping take precedence. When IGMP snooping is disabled globally,
snooping can still be configured per VLAN interface, but the interface settings will not take
effect until snooping is re-enabled globally.
◆
IGMP Querier
– When enabled, the switch can serve as the Querier (on the selected
interface), which is responsible for asking hosts if they want to receive multicast traffic.
(Default: Disabled)
A router, or multicast-enabled switch, can periodically ask their hosts if they want to receive
Summary of Contents for GEP-1070
Page 80: ...80 authentication from any point within the network...
Page 168: ...168...
