50
TCP/IP Protocol Installation
1. Click
Start
, point to
Settings
and select
Control Panel
.
2. Double click the
Network
icon.
3. If the
TCP/IP
Protocol
is not already installed, click
Add
.
4. Select
Protocol
and click
Add
.
5. Select
Microsoft
from the Manufacturers list.
6. Select
TCP/IP
Protocol
from the Network Protocols list.
7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP
address automatically”, if a DHCP server is available on the LAN.
8.
Restart the computer.
9. Done.
Note:
Using TCP/IP protocol to access the print server requires well-configured TCP/IP
settings. If you are not familiar with these settings, please consult your network
administrator for details or ask for help.
IPX/SPX-compatible Protocol Installation
1. Click
Start
, point to
Settings
, and select
Control Panel
.
2. Double click the
Network
icon.
3. If the
IPX/SPX-compatible Protocol
is not already installed, click
Add
.
4. Select
Protocol
and click
Add
.
5. Select
Microsoft
from the Manufacturers list.
6. Select
IPX/SPX-compatible Protocol
from the Network Protocols list and follow the
instructions on the screen.
7.
Restart the computer.
8. Done.
Summary of Contents for FPS-1031
