LevelOne FPS-1031 User Manual Download Page 34

Page: 34 / 83

Use DHCP/BOOTP:

This option allows you to view DHCP/ BOOTP status.

If there is a

DHCP/BOOTP server on your network, this option allows the print server
to obtain IP-related settings automatically from your DHCP server.

IP Address:

This option allows you to view IP address from the print server. The IP address

must meet the IP addressing requirements of the network segment. (default:
192.168.0.10)

Subnet Mask:

This option allows you to view subnet mask from the print server.

Gateway’s IP:

This option allows you to view gateway from the print server.

Rendezvous Settings:

The Rendezvous settings of print server Enable or Disable.

Netware Status:

1. Click

Status

, it then appears the sub-menu.

2. Click

Netware

it then as shown in the following picture.

Summary of Contents for FPS-1031




















































































Search results

Summary of Contents for FPS-1031

Reviews:

Related manuals for FPS-1031

Brands by name

Popular brands

LevelOne FPS-1031, User Manual

Search results

Summary of Contents for FPS-1031

Reviews:

Related manuals for FPS-1031

Brands by name

Popular brands