13
7. On the
Change Settings
screen, select
No
or
Yes
:
Click
No
if you want the print server to keep using the default IP address and keep the
default settings:
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0
Click
Yes
if you want change IP address to the print server, and then click
Next
.
8. In the setup wizard, select an already configured printer from the list, click
Next
,
Next
and then
Finish
to complete the installation.
or
Note:
1. The IP address of print server must be within the same subnet as your network adapter.
2. After you save the new IP address, the print server will automatic reboot once to make
ready for the new IP address. It may take a couple of seconds.
Summary of Contents for FPS-1031
