LevelOne FPS-1031 User Manual Download Page 49

Page: 49 / 83

6. Network Print Monitor

Preparation

The print server supports

TCP/IP

IPX/SPX

and

NetBEUI

protocols under Windows

95/98/Me. Please make sure that the following steps have been completed before
proceeding with installation under Windows PC.

Select A Desired Protocol

TCP/IP

The TCP/IP Protocol must be installed. For further information, please read “

TCP/IP

Protocol Installation”

section in this chapter.

Note:

If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print

server” section later in this chapter.

IPX/SPX

The IPX/SPX-compatible Protocol must be installed. For further information, please read
“

IPX/SPX-compatible Protocol Installation”

section in this chapter.

NetBEUI

The NetBEUI protocol must be installed. For further information, please read “

NetBEUI

Protocol Installation”

section in this chapter.

Summary of Contents for FPS-1031




















































































Search results

Summary of Contents for FPS-1031

Reviews:

Related manuals for FPS-1031

Brands by name

Popular brands

LevelOne FPS-1031, User Manual

Search results

Summary of Contents for FPS-1031

Reviews:

Related manuals for FPS-1031

Brands by name

Popular brands