LevelOne FPS-1031, User Manual

Page: 41 / 83

41
DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server
to obtain IP-related settings automatically from your DHCP server.
IP Address: This option allows you to input IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment.
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly
recommended.
Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
Gateway : This option allows you to input gateway from the print server. This IP address of
gateway must meet the router or gateway to go across of the network
segment.
Rendezvous Settings : Enable/Disable the Rendezvous support for Mac OS 10.
NetWare Setup
1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2. Select NetWare and type in the Print server that created during PCONSOLE Select
the NetWare File Server to which the print server device will be attached.
3. Click Setup , it then appears the sub-menu.
4. Click NetWare , it then as shown in the following picture.