Leuze CML 730-PS Page 101 Operating Instructions Manual Download

Page: 101 / 132

Connecting to a PC – Sensor Studio

Leuze electronic

CML 730-PS

101

(see chapter 17.4).

Receiver

IO-Link USB master

Plug-in power supply unit

Figure 12.2: CML 700i (analog/IO-Link) connection to the IO-Link USB master

12.2.5 Installing the DTM and IODD

Prerequisites:

• The light curtain is connected to the PC via the IO-Link USB master.
• FDT frame and driver for IO-Link USB master are installed on the PC.



Select the IO-Link device DTM (User Interface) installation option and follow the instructions on the

screen.

The Installation Wizard installs the DTM and the IO Device Description (IODD) for the light curtain.

12.3 Starting the

Sensor Studio

configuration software

Prerequisites:

• The light curtain has been mounted (see chapter 6) and connected (see chapter 7) correctly.
• The

Sensor Studio

configuration software is installed on the PC (see chapter 12.2 "Installing

Sensor Studio configuration software and IO-Link USB master").

• The light curtain is connected to the PC via the IO-Link USB master (see chapter 12.2 "Installing

Sensor Studio configuration software and IO-Link USB master").



Start the

Sensor Studio

configuration software by double-clicking the

Sensor Studio

icon (

The Mode selection of the Project Wizard is displayed automatically or under the File menu item.



Select the Device selection without communication connection (offline) configuration mode and click on

[Next].

The Project Wizard displays the device selection list of the configurable devices.

DTM and IODD for all IO-Link devices currently available from Leuze electronic are installed.

NOTICE
IO Device Description (IODD) not up-to-date!
The values in the IODD file supplied with the device may no longer be up-to-date.



Download the up-to-date IODD file from the Internet at www.leuze.com.

Summary of Contents for CML 730-PS





































































































































Search results

Summary of Contents for CML 730-PS

Reviews:

Related manuals for CML 730-PS

Brands by name

Popular brands

Leuze CML 730-PS, Operating Instructions Manual

Search results

Summary of Contents for CML 730-PS

Reviews:

Related manuals for CML 730-PS

Brands by name

Popular brands