Leuze CML 730-PS, Operating Instructions Manual

Page: 78 / 132

Starting up the device - IO-Link interface
Leuze electronic CML 730-PS 78
General configurations (group 4)
Additional settings (group 5)
Number of configured
logical individual beams
68 3
(bit
offset
= 32)
unsigned 16 RO 16 The number of logical individual beams is depen
-
dent on the selected operating mode.
The evaluation functions of the CML 700i are cal
-
culated on the basis of the logical individual
beams.
Number of cascades 68 4
(bit
offset
= 16)
unsigned 16 RO 1 The CML 700i has a modular structure. 8, 16 or
32 individual beams are always grouped into a
cascade.
Device cycle time 68 5
(bit
offset
= 0)
unsigned 16 RO 1000 The device cycle time defines the duration of a
measurement cycle of the CML 700i.
Parameter Index Sub-
index
Data type Access Value range Default Explanation
Configured under group 4 “General configurations” are the type of scanning (parallel-/diagonal-
/crossed-beam), counting direction and minimum object diameter for the evaluation (smoothing).
The minimum hole size for the evaluation, e.g., with web material, is configured via inverted
smoothing.
Parameter Index Sub-
index
Data type Access Value range Default Explanation
Global settings 71 0 record 32 bit RW
Beam mode 71 1
(bit
offset
= 24)
unsigned 8 RW 0 … 2 0 0: Parallel-beam scanning
1: Diagonal-beam scanning
2: Crossed-beam scanning
Counting direction 71 2
(bit
offset
= 16)
unsigned 8 RW 0 … 1 0 0: Normal - starting at the connector side
1: Inverted – starting opposite the connector site
Smoothing 71 3
(bit
offset
= 8)
unsigned 8 RW 1 … 255 1 Smoothing:
Less than i interrupted beams are ignored.
Inverted smoothing 71 4
(bit
offset
= 0)
unsigned 8 RW 1 … 255 1 Inverted smoothing:
Less than i free beams are ignored.
The additional settings specify the filter depth, integration time (hold function) and key lock on
the receiver control panel.
Parameter Index Sub-
index
Data type Access Value range Default Explanation
Additional settings 74 0 record 32 bit RW
Teach mode 74 1 unsigned 8 RW 0 0 0: Automatic teach
Filter depth 74 2
(bit
offset
= 16)
unsigned 8 RW 1 … 255 1 The filter depth indicates the necessary number of
consistent beam states before the evaluation of
the measurement values. The filter depth corre
-
sponds to the number of passes with interrupted
beam so that the result leads to switching.