Device description
Leuze electronic
CML 730-PS
14
1
Total of interrupted beams
2
Logic state at pin 2 (0 = not active, 1 = active)
3
Logic state at pin 5 (0 = not active, 1 = active)
4
Logic state at pin 6 (0 = not active, 1 = active)
5
Logic state at pin 7 (0 = not active, 1 = active)
Figure 3.5: OLED display on the receiver in process mode
3.4.3 Operating indicators on the transmitter
Located on the transmitter is an LED which serves as a function indicator.
Table 3.2:
Meaning of the LED on the transmitter
3.5
Operating elements on the receiver control panel
Located on the receiver below the OLED display is a membrane keyboard with two function buttons for
entering various functions.
Figure 3.6: Function buttons on the receiver
3.6
Menu structure of the receiver control panel
The following summary shows the structure of all menu items. In a given device model, only the actually
available menu items are present for entering values or for selecting settings.
If the control panel is not used for several minutes, the display darkens and switches off. Press
a function button to again make the display visible. Settings for visibility, display duration, etc.
can be changed via the Display menu.
1
2
3
4
5
LED
Color
State
Description
1
Green
ON
(continuous light or
flashing in sync with
the measurement)
Light curtain operates continuously with maximum measure
-
ment frequency
OFF
No communication with the receiver
Light curtain waits for external trigger signal
