Leuze electronic OMS2/120 CAN, Technical Description, Page: 5 / 44

electronic #Leuze Safety
#Leuze electronic GmbH + Co KG, Postfach 11 11, D-73277 Owen/Teck, In der Braike1, D-73277 Owen/Teck, Tel. ++49 (0)7021/5730, Fax ++49 (0)7021/573199
Date: 01.07.2003 LZ - ELE - BA - GB - 0009 - 00 Page 5 of 42
1 Safety
1.1 General risk potential
The Laser Measuring Device OMS2 CANopen cannot be operated independently, but
is installed as part of an overall system usually consisting of several interacting
components. For this reason, the laser measuring device is not equipped directly with
a protective device.
Warning
The corresponding measures must be taken in order to avoid person and
property damages.
However, in the event of an error via the error register "Object 1001h: Error Register",
S21 a generally occurred error is displayed by setting the bit 5. Via the "Object 1003h:
Pre-defined Error Field", S22 the error occurred generally is specified and the cause
described in detail. Via the "Emergency Message", S34 the Error Register/Error Field
can be read. It is therefore essential to
integrate the error messages into your own
safety system via the evaluation software (e.g. a PLC).
All persons responsible for the assembly, start-up and operation of the device must
•
be suitably qualified
•
adhere strictly to this operating manual.
Your safety and the safety of your equipment depends on this!
1.2 Safety information
This operating manual contains information which must be observed in the interests of
your own personal safety and that of your equipment. The safety hints are
emphasised by a warning triangle and classified according to the degree of danger as
follows:
Warning
means that failure to take the relevant safety precautions can lead to serious damage
to property or injuries.
i
Note
refers to important information and features of the product, plus tips on its application.