Leuze electronic OMS2/120 CAN Technical Description Download Page 44

Page: 44 / 44

Ing. Franz Schmachtl KG
Tel. Int. + 43 (0) 732/76 46 - 0
Fax Int. + 43 (0) 732/785036
E-mail: [email protected]
http://www.schmachtl.at

Nortécnica S. R. L.
Tel. Int. + 54 (0) 11 / 47 57 - 31 29
Fax Int. + 54 (0) 11 / 4757 - 10 88
E-mail: [email protected]

Balluff-Leuze Pty. Ltd.
Tel. Int. + 61 (0) 3 / 97 64 23 66
Fax Int. + 61 (0) 3 / 97 53 32 62
E-mail: [email protected]

Leuze electronic nv / sa
Tel. Int. + 32 (0) 2/2531600
Fax Int. + 32 (0) 2/2531536
E-mail: [email protected]

Leuze electronic Ltda.
Tel. Int. + 55 (0) 11/ 4195 - 6134
Fax Int. + 55 (0) 11/ 4195 - 6177
E-mail: [email protected]
http://www.leuze.com.br

Leuze electronic AG
Tel. Int. + 41 (0) 1/8340204
Fax Int. + 41 (0) 1/8332626
E-mail: [email protected]

Componentes Electronicas Ltda.
Tel. Int. + 57 (0) 4/35110 49
Fax Int. + 57 (0) 4/3511019
E-mail: [email protected]

Schmachtl CZ Spol. SR. O.
Tel. Int. + 420 (0) 2 / 44 00 1500
Fax Int. + 420 (0) 2 / 44 91 0700
E-mail: [email protected]
http://www.schmachtl.cz

Desim Elektronik APS
Tel. Int. + 45/ 70220066
Fax Int. + 45/ 70222220
E-mail: [email protected]

Leuze electronic GmbH + Co KG
Geschäftsstelle Dresden
Telefon (0351) 2 84 1105
Telefax (0351) 2 84 1103
E-mail: [email protected]

Lindner electronic GmbH
Vertrieb Nord, Hannover
Telefon (0511) 96 60 57 - 0
Telefax (0511) 96 60 57 - 57
E-mail: [email protected]

W + M plantechnik
Dipl.-Ing. Wörtler GmbH + Co.
Vertrieb West, Wuppertal
Telefon (0202) 37112-0
Telefax (0202) 318495
E-mail: [email protected]

Leuze electronic GmbH +Co KG
Geschäftsstelle Frankfurt
Telefon (06181) 9177-0
Telefax (06181) 917715
E-mail: [email protected]

Leuze electronic GmbH + Co KG
Geschäftsstelle Owen/Bad.-Württ.
Telefon (0 70 21) 98 50 - 910
Telefax (0 70 21) 98 50 - 911
E-mail: [email protected]

Leuze electronic GmbH + Co KG
Geschäftsstelle München
Telefon 08141/5350200
Telefax 08141/5350220
E-mail: [email protected]

Leuze electronic S.A.
Tel. Int. + 34 93/4 09 79 00
Fax Int. + 34 93/4 90 35 15
E-mail: [email protected]

APlus Systems
Tel. int. + 20 (0) 2/ 4189036
Fax int. + 20 (0) 2/ 4141280
E-mail: [email protected]

Leuze electronic sarl.
Tel. Int. + 33 (0) 1/60051220
Fax Int. + 33 (0) 1/60050365
E-mail: [email protected]
http://www.leuze-electronic.fr

SKS-automaatio
Tel. Int. + 358 (0) 9/85 26 61
Fax Int. + 358 (0) 9/8 52 68 20
E-mail: [email protected]
http://www.sks.fi

Leuze Mayser electronic Ltd.
Tel. Int. + 44 (0) 1480/408500
Fax Int. + 44 (0) 1480/403808
E-mail: [email protected]
http://www.leuzemayser.co.uk

UTECO A.B.E.E.
Tel. Int. + 30 (0) 210/ 4 2100 50
Fax Int. + 30 (0) 210/ 4 2120 33
E-mail: [email protected]

All Impex GmbH
Tel. + Fax +7 095/ 9332097
E-mail: [email protected]

Kvalix Automatika Kft.
Tel. Int. + 36 (0) 1/399 06 15
Fax Int. + 36 (0) 1/3 698488
E-mail: [email protected]
http://www.kvalix.hu

Sensortech Company
Tel. Int. + 852/26 51 01 88
Fax Int. + 852/26 51 03 88
E-mail: [email protected]

IVO Leuze Vogtle Malanca s.r.l.
Tel. Int. + 39 02 / 26 11 0643
Fax Int. + 39 02 / 26 11 06 40
E-mail: [email protected]
http://www.ivoleuze.com

Galoz electronics Ltd.
Tel. Int. + 972 (0) 3/9023456
Fax Int. + 972 (0) 3/9021990
E-mail: [email protected]

Global Tech Corp.
Tel. Int. + 91 (0) 20 /4 47 00 85
Fax Int. + 91 (0) 20 /4 47 00 86
E-mail: [email protected]

C. Illies & Co., Ltd.
Tel. Int. + 81 (0) 3 /34434111
Fax Int. + 81 (0) 3 /34434118
E-mail: [email protected]
http://www.illies.de

Leuze electronic Co., Ltd.
Tel. Int. + 82 (0) 31/3 82 82 28
Fax Int. + 82 (0) 31/3 82 85 22
E-mail: [email protected]
http://www.leuze.co.kr

Ingermark (M) SDN.BHD
Tel. Int. + 60 (0) 3 / 60 34 27 88
Fax Int. + 60 (0) 3 / 60 34 21 88
E-mail: [email protected]

Leuze Lumiflex México, S.A. de C.V.
Tel. Int. + 52 (0) 81/83 524060
Fax Int. + 52 (0) 81/83 524034
E-mail: [email protected]
http://www.leuze.de

Elteco A / S
Tel. Int. + 47 (0) 35 / 573800
Fax Int. + 47 (0) 35 / 573849
E-mail: [email protected]
http://www.elteco.no

Leuze electronic B.V.
Tel. Int. + 31 (0) 418 / 65 35 44
Fax Int. + 31 (0) 418 / 65 38 08
E-mail: [email protected]
http://www.leuze.nl

LA2P, Lda.
Tel. Int. + 351 (0) 21/4 44 70 70
Fax Int. + 351 (0) 21/4 44 70 75
E-mail: [email protected]
http://www.la2p.pt

Balluff Sp. z. o. o.
Tel. Int. + 48 (0) 22/6 51 96 79
Fax Int. + 48 (0) 22/8 42 97 28
E-mail: [email protected]

Imp. Tec. Vignola S.A.I.C.
Tel. Int. + 56 (0) 32/256521
Fax Int. + 56 (0) 32/258571
E-mail: [email protected]

Great Cofue Technology Co., Ltd.
Tel. Int. + 886 (0) 2/29 83 80 77
Fax Int. + 886 (0) 2/29 85 33 73
E-mail: [email protected]

O`Boyle s.v.l.
Tel. Int. + 40 (0) 56 20 13 46
Fax Int. + 40 (0) 56 22 10 36
E-mail: [email protected]
http://www.oboyle.ro

Countapulse Controls (PTY.) Ltd.
Tel. Int. + 27 (0) 11/6157556
Fax Int. + 27 (0) 11/6157513
E-mail: [email protected]

Leuze SensorGruppen AB
Tel. + 46 (0) 8 / 731 51 90
Fax + 46 (0) 8 / 731 51 05
E-mail: [email protected]

Balluff Asia Pte Ltd
Tel. Int. + 65 / 62 52 43 84
Fax Int. + 65 / 62 52 90 60
E-mail: [email protected]

Schmachtl SK s.r.o.
Tel. Int. + 421 (0) 2/ 54 78 92 93
Fax Int. + 421 (0) 2/ 54 77 21 47
E-mail: [email protected]

Tipteh d.o.o.
Tel. Int. + 386 (0) 1/ 2 00 5150
Fax Int. + 386 (0) 1/ 2 00 5151
E-mail: [email protected]
http://www.tipteh.si

Industrial Electrical Co. Ltd.
Tel. Int. + 66 (0) 2/6 42- 67 00
Fax Int. + 66 (0) 2/6 42-42 49
E-mail: [email protected]

MEGA Teknik elek. San. ve Tic. Ltd.
Tel. Int. + 90 (0) 212/3 20 04 11
Fax Int. + 90 (0) 212/3 20 04 16
E-mail: [email protected]
http://www.megateknik.com

Leuze Lumiflex Inc.
Tel. Int. + 1 (0) 973/ 5860100
Fax Int. + 1 (0) 973/ 586 15 90
E-mail: [email protected]
http://www.leuze-lumiflex.com

TR Electronic GmbH
Shanghai Rep. Office
Tel. Int. + 86(0)21/ 58314825
Fax Int. + 86(0)21/ 58314829
E-mail: [email protected]

CDN

USA

SLO

SGP

RSA

ROC

RCH

MEX

MAL

KOR

IND

EST

RUS

FIN

AUS

ARG

Leuze

electronic

Leuze electronic GmbH + Co KG
Postfach 11 11, D-73277 Owen/Teck
Tel. (0 70 21) 57 30, Fax (0 70 21) 57 31 99

E-mail: [email protected]
http://www.leuze.de

Vertrieb und Service

7/01

–

/03

Artikel-Nr. 500 38 947

LZ-V-VI-D-0001-00

Summary of Contents for OMS2/120 CAN













































Search results

Summary of Contents for OMS2/120 CAN

Reviews:

Leuze electronic OMS2/120 CAN, Technical Description, Page: 44 / 44

Search results

Summary of Contents for OMS2/120 CAN

Reviews: