Configuration / Parameter Setting
#Leuze
#Leuze electronic
GmbH + Co KG, Postfach 11 11, D-73277 Owen/Teck, In der Braike1, D-73277 Owen/Teck, Tel. ++49 (0)7021/5730, Fax ++49 (0)7021/573199
Page 28 of 42
LZ - ELE - BA - GB - 0009 - 00
Date: 01.07.2003
4.1.1.1 Object 2000 - Clear Preset
Via this object, the zero-point correction calculated in "Object 6003h – Preset Value" is
deleted. The correction arises from the difference of the desired preset value to the
physical laser position. That means, after deletion of the zero-point correction the
laser outputs his "real" physical position.
Unsigned8, Read/Write
0 Clear
Preset
1 No
clearing
4.1.1.2 Object 2001 – Output value in case of an error
Determines, which data value is to be transmitted in the case of an error. The data
value is output, if the laser can output no more measurement. This is given e.g., if a
beam interruption is present.
Unsigned8, Read/Write
0 Null
(default)
The position is set to "0"
1
0xFF
All 24 bits are set to '1' (0xFFFFFF or -1)
2
last valid value
Output of the last valid position
4.1.1.3 Object 2003 - Function external input
Determines, whether the switching input is to be used as
-
Preset input
-
Switch-off Laser-Diode (LD) or
-
Failure reset - input
With connection of the switching input as Preset-input the laser is adjusted on the
predefined position value in "Object 6003h – Preset Value", S30. With connection the
switching input as LD-input the laser diode is switched off for the extension of the life
time. If in the PC-program "OMSConfiguration-Tool" in the basic parameters the
switching-off of the laser diode is carried out automatically, the LD-switching input
does not have a function.
Unsigned8, Read/Write
0 disabled
(default)
Function switched off, following parameters without
meaning
1 Preset
function
External switching input is determined as Preset input.
Software execution see chapter
"Object 2006 – Switching functions", S29.
2
LD switching input
External switching input is used for switching-off of the
laser diode. Software switching-off see chapter
"Object 2006 – Switching functions", S29.
3
Error
acknowledgement
External switching input is used as error acknowledge-
ment. Software acknowledgement see chapter
"Object 1003h: ", S22.
Summary of Contents for OMS2/120 CAN
Page 43: ......