Configuration / Parameter Setting
#Leuze
#Leuze electronic
GmbH + Co KG, Postfach 11 11, D-73277 Owen/Teck, In der Braike1, D-73277 Owen/Teck, Tel. ++49 (0)7021/5730, Fax ++49 (0)7021/573199
Page 32 of 42
LZ - ELE - BA - GB - 0009 - 00
Date: 01.07.2003
4.1.2.2 Object 6501h – Measuring step
The object 6501h indicates the adjusted resolution of the measuring system in 1/100 mm.
(see also "Object 6005h – Measuring step")
Structure of parameter
Unsigned32, Read
Measuring step
Byte 0
Byte 1
Byte 2
Byte 3
2
7
to 2
0
2
15
to 2
8
2
23
to 2
16
2
31
to 2
24
adjusted resolution in 1/100 mm
0
0
4.1.2.3 Object 6503h - Alarms
Additionally to the emergency message, object 6503h provides further alarm
messages. An alarm is set if a malfunction in the laser could lead to incorrect position
value. If an alarm occurs, the according bit is set to logical high until the alarm is
cleared and the laser is able to provide an accurate position value.
Structure of parameter
Unsigned16, Read
Alarms
Byte 0
Byte 1
error code
Reserved for further use
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
-
Description of the error code
No error
Byte 0 = 0x00
Corresponds to the normal condition
Intensity
Bit 0 in byte 0
The bit is set, if an intensity value of smaller 8% is
present, or the laser beam is interrupted and leads to the
error value output.
Temperature
Bit 1 in byte 0
The bit is set, if the device temperature is outside of the
range from 0 - 50 °C. A low range deviation has still no
influence on the measurement and is therefore to be
regarded as a warning.
Hardware
Bit 2 in byte 0
The bit is set, if an internal hardware error were noticed
and leads to the error value output.
Laser diode switched off
Bit 3 in byte 0
The bit is set, if the laser diode was switched off over the
bus, or the switching input. Serves only for information
purposes.
Intensity warning
Bit 4 in byte 0
The bit is set, if an intensity value of smaller 12% were
determined and means that the measuring system optics,
or the reflecting foil is to be cleaned. However, the device
operates error-freely furthermore.
Summary of Contents for OMS2/120 CAN
Page 43: ......