Lenz Digital plus LH101, Operating Manual

Page: 187 / 331

Configuring (programming) decoder settings 75
After the result is displayed, change to the
bitwise (binary) display of the decimal
numeric value.
The bottom line of the display indicates which
bits are set. For decimal value 10 these are
bits 2 and 4 (counting starts at 1).
If you want to make changes, press the corresponding number keys.
In the following example, bit 1 is to be set additionally while bit 2 is to
be deleted:
Press key '1' to set the corresponding bit 1.
Press key '4' to delete the corresponding bit
4.
Press the 'locomotive' key to start
programming.
You can change between the bitwise and the decimal display of the
value at any time:
Decimal display
Bitwise display
Now, you have the following options:
a)
Select another CV
or
b)
return to “Controlling locomotive”.