manualshive.com logo in svg

Lenovo tihnkserver rd330, Hardware Maintenance Manual

Share
Download
Lenovo tihnkserver rd330 Hardware Maintenance Manual Download Page 68

You also can use the Firmware Updater program to help you keep the server firmware up-to-date. See
“Updating the firmware” on page 67.

Updating (flashing) the BIOS

This topic provides instructions on how to update (flash) the BIOS.

Notes:

• Update the BIOS on your server only if the newer BIOS version specifically solves a problem you have.

We do not recommend BIOS updates for servers that do not need them. You can view the updated
information for the new BIOS version in the installation instructions for the BIOS update package.

• Downgrading the BIOS to an earlier version is not recommended and might not be supported. An earlier

BIOS version might not support the latest system configurations.

• If the power to your server is interrupted while the POST and BIOS are being updated, your server might

not restart correctly. Ensure that you perform the BIOS update procedure in an environment with a
steady power supply. Besides, ensure that your server can restart successfully without encountering
hardware problems.

• If you have updated the BIOS firmware, all the BIOS settings become the default settings of the updated

BIOS version. You need to check and reconfigure the BIOS settings for your specific needs. You can
select

Save as User Defaults

on the

Save & Exit

menu in the Setup Utility program to save your current

BIOS settings as user default values before updating the BIOS. Then, you can select

Restore User

Defaults

on the

Save & Exit

menu in the Setup Utility program to restore the user default values after

updating the BIOS. In this case, you can keep your previous BIOS settings and do not need to reconfigure
the settings after updating the BIOS. You also can note down your specific BIOS settings before updating
the BIOS for an easier reconfiguration in the new BIOS version.

To update (flash) the BIOS, do the following:

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate the BIOS

update package.

2. Download the BIOS update package and the installation instructions in a TXT file.

3. Print the TXT file that contains the installation instructions and follow the instructions to update (flash)

the BIOS.

4. Do one of the following after the BIOS update process is completed:

• If you have saved your BIOS settings as user default values before updating the BIOS, select

Restore

User Defaults

on the

Save & Exit

menu in the Setup Utility program to restore the user default

values. Then, check if the user default values meet your current requirements.

• Check and reconfigure the BIOS settings for your specific needs based on your note or refer to

“Using the Setup Utility program” on page 47.

Recovering from a BIOS update failure

If the power to your server is interrupted while the BIOS is being updated, your server might not restart
correctly. If this happens, perform the following procedure to recover from the BIOS update failure.

Note:

If the operating system of your server is installed under EFI mode, you need to reinstall the operating

system after recovering the BIOS.

To recover from a BIOS update failure, do the following:

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to download a BIOS

update package. Then, put the amiboot.rom file contained in the package into the root directory of
a bootable USB key.

54

ThinkServer RD330 Hardware Maintenance Manual

Summary of Contents for tihnkserver rd330







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands