Lenovo tihnkserver rd330, Hardware Maintenance Manual

Page: 29 / 198

• Front view of server models with 2.5-inch hard disk drives
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
Front view of server models with 3.5-inch hard disk drives
The following illustration shows the front view of server models with 3.5-inch hard disk drives.
CPU Mem PSU
ID
Figure 4. Front view of server models with 3.5-inch hard disk drives
1
Front panel
5
Right rack handle
2
Intelligent Diagnostics Module
6
3.5-inch hard disk drive area
3
Pull-out information card
7
Left rack handle
4
Slim optical drive (available in some models)
1 Front panel
For detailed information about the controls, connectors, and status LEDs on the front panel, see “Front
panel” on page 17.
2 Intelligent Diagnostics Module
For more information, see “Intelligent Diagnostics Module” on page 19.
3
Pull-out information card
The machine type, model, and serial number label of the server is attached on the pull-out information card.
See “Machine type, model, and serial number label” on page 13.
4 Slim optical drive
Some server models come with a slim SATA optical drive.
5 Right rack handle
7 Left rack handle
If your server is installed in a rack cabinet, you can use the rack handles to slide the server out of the rack
cabinet; or use the rack handles and screws to secure the server in the rack cabinet so that the server
cannot slide out, especially in vibration-prone areas. For more information, refer to the
Rack Installation
Instructions that comes with your server.
Chapter 3
.
Product overview
15