Lenovo tihnkserver rd330, Hardware Maintenance Manual

Page: 155 / 198

8. Position the new IDM on the chassis so that the screw holes in the new IDM are aligned with the
corresponding mounting studs on the chassis. Then, install the screws to secure the new IDM in place.
ID
Mem
CPU
PSU
Figure 90. Installing the IDM
9. Connect the IDM cable to the rear of the new IDM.
10. If you are instructed to return the old IDM, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 155.
Replacing a system fan
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 69.
This topic provides instructions on how to replace a system fan.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
Chapter 6
.
Installing, removing, or replacing hardware
141