Lenovo ThinkServer TS440 70AL, Hardware Maintenance Manual

Page: 99 / 202

• Use any documentation that comes with the TR 500 Key and follow those instructions in addition to
the instructions in this topic.
To remove the TR 500 Key, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See “Removing the server cover” on page 67.
3. Lay the server on its side for easier operation.
4. Remove the PCI card bracket assembly. See “Removing and reinstalling the PCI card bracket
assembly” on page 71.
5. Locate the ThinkServer RAID 500 Adapter, which is installed in the PCI-E slot 1 on the system board.
See “System board components” on page 39.
6. Remove any parts or disconnect any cables that might impede your operation.
7. Remove the TR 500 Key from the ThinkServer RAID 500 Adapter. If necessary, you can remove the
ThinkServer RAID 500 Adapter first, remove the TR 500 Key from it, and then reinstall the ThinkServer
RAID 500 Adapter. See “Installing or removing the RAID card” on page 82.
Note: Carefully handle the TR 500 Key by its edges.
Figure 42. Removing the TR 500 Key from the ThinkServer RAID 500 Adapter
8. Reinstall any parts or reconnect any cables that you have removed.
9. Reinstall the PCI card bracket assembly. See “Removing and reinstalling the PCI card bracket
assembly” on page 71.
10. If you are instructed to return the old TR 500 Key, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 163. Because the
hardware RAID 5 and 50 levels are not available without the TR 500 key, you might need to reconfigure
RAID for your server. For information about how to configure the hardware RAID, refer to the
MegaRAID
SAS Software User Guide on the documentation DVD that comes with your server.
Chapter 6
.
Installing, removing, or replacing hardware
87