Lenovo ThinkServer TS440 70AL Hardware Maintenance Manual Download Page 75

Page: 75 / 202

Using the Firmware Updater program

The Firmware Updater program enables you to maintain your system firmware up-to-date and helps you
avoid unnecessary outages.

To update your system firmware using the Firmware Updater program, do the following:

Note:

Before distributing the firmware updates to a server, ensure that your server can restart successfully

without encountering hardware problems.

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate the

Firmware Updater program.

2. Download the ISO image for the Firmware Updater program and the TXT file that contains the

installation instructions.

3. Use any CD or DVD burning software to create a bootable disc with the ISO image.

4. Print the TXT file and follow the instructions to use the Firmware Updater program to update your

system firmware.

Chapter 5

Configuring the server

Summary of Contents for ThinkServer TS440 70AL











































































































































































































Search results

Summary of Contents for ThinkServer TS440 70AL

Reviews:

Related manuals for ThinkServer TS440 70AL

Brands by name

Popular brands

Lenovo ThinkServer TS440 70AL, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS440 70AL

Reviews:

Related manuals for ThinkServer TS440 70AL

Brands by name

Popular brands