Lenovo ThinkServer TS440 70AL, Hardware Maintenance Manual

Page: 117 / 202

• If you are replacing an RDX drive, disconnect the signal cable and the power cable from the rear
of the RDX drive. Press the release button 1 in the direction as shown and push the RDX drive
from the rear until it is projected from the front of the chassis. Then, hold the RDX drive from the
front and completely slide it out of the chassis.
1
Figure 59. Removing the RDX drive
5. Touch the static-protective package that contains the new RDX drive to any unpainted surface on the
outside of the server. Then, take the new RDX drive and the signal cable out of the package.
Chapter 6
.
Installing, removing, or replacing hardware
105