Lenovo ThinkServer TD350, Installation Manual

Page: 89 / 122

12. In the Please Select A Device window, do one of the following to create a partition and then click Next .
• Manually create a root partition (/)
To create a root partition, do the following:
a. Click Create . The Create Storage window is displayed.
b. Select Standard Partition and then click Create .
c. In the Add Partition window, select the forward slash (/) from the Mount Point drop-down list box.
d. Select Ext4 from the File System Type drop-down list box.
e. In the Allowable Drives window, choose the hard disk drive to install the operating system.
f. Type the amount of space (in MB) in the New Partitions Size window and then click OK .
• Manually create a boot partition (/boot/efi)
To create a boot partition, do the following:
a. Click Create . The Create Storage window is displayed.
b. Select Standard Partition and then click Create .
c. In the Add Partition window, select /boot/efi from the Mount Point drop-down list box.
d. Select EFI System Partition from the File System Type drop-down list box.
e. In the Allowable Drives window, choose the hard disk drive to install the operating system.
f. Type the amount of space (in MB) in the New Partitions Size window and then click OK .
• Manually create a swap partition
To create a swap partition, do the following:
a. Click Create . The Create Storage window is displayed.
b. Select Standard Partition and then click Create .
c. In the Add Partition window, select swap from the File System Type drop-down list box.
d. In the Allowable Drives window, choose the hard disk drive to install the operating system.
e. Type the amount of space (in MB) in the New Partitions Size window and then click OK .
Go back to the Partitioner window, verify that the created root partition, boot partition, or swap partition
is correct and click
Next .
13. If the Format Warnings window, click Format to format the hard disk drive.
14. In the “Writing storage configuration to disk” window, click Write changes to disk .
15. In the “Boot loader operating system list” window, click Next .
16. The default installation is a basic server installation. You can customize your server by selecting a
different set of software from the software list or adding additional repositories that you want to use for
the software installation. Select
Customize now . Then, click Next . The installation process begins.
Notes:
• If a warning window is displayed, select the option of your choice and then continue with the
installation.
• Ensure that the package tboot-1.7.4-1.el6.X86_64 - Performs a verified launch using Intel TXT is
not selected.
17. After the installation is completed, click Reboot to restart your server.
18. The installation continues after the server restarts. In the Welcome window, click Forward .
19. In the License Information window, select Yes, I agree to the License Agreement , and then click
Forward .
Chapter 3
.
Installing an operating system in UEFI mode
83