Lenovo ThinkServer TD350, Installation Manual

Page: 54 / 122

6. Configure the date, time, language, and keyboard layout for the system.
7. In the INSTALLATION SUMMARY window, click SOFTWARE SELECTION , and then select the software
that you want to install.
Note: The following steps are based on the scenario that you select Server with GUI , select all of the
options on the right pane, and click Done .
8. In the INSTALLATION SUMMARY window, click INSTALLATION DESTINATION .
9. Select the drive partition on which you want to install the operating system. Then, click Done . If you
want to create a partition manually, do the following:
a. Select I will configure partitioning and then click Done . Do one of the following to create a partition
and click Done .
• Manually create a root partition (/)
To create a root partition, do the following:
1) In the Manual Partitionning window, click + in the bottom left corner.
2) In the ADD A NEW MOUNT POINT window, select the forward slash (/) from the Mount Point
drop-down list box.
3) Type the amount of space (in MB) in the Desired Capacity field and then click Add a new
mount point .
• Manually create a boot partition (/boot/efi)
To create a boot partition, do the following:
1) In the Manual Partitionning window, click + in the bottom left corner.
2) In the ADD A NEW MOUNT POINT window, select /boot (or /boot/efi for the UEFI mode)
from the Mount Point drop-down list box.
3) Type the amount of space (in MB) in the Desired Capacity field and then click Add a new
mount point .
• Manually create a swap partition
To create a swap partition, do the following:
1) In the Manual Partitionning window, click + in the bottom left corner.
2) In the ADD A NEW MOUNT POINT window, select swap from the Mount Point drop-down
list box.
3) Type the amount of space (in MB) in the Desired Capacity field and then click Add a new
mount point .
b. In the SUMMARY OF CHANGES window, select Accept Changes .
10. In the INSTALLATION SUMMARY window, click Begin Installation . The installation process begins.
11. In the CONFIGURATION window, click ROOT PASSWORD to set the root password. Then, click
Reboot .
12. In the INITIAL SETUP window, click LICENSE INFORMATION .
13. In the LICENSE INFORMATION window, select I accept the license agreement and click Done .
14. In the INITIAL SETUP window, click Finish Configuration .
15. In the Kdump window, click Forward .
16. In the “Subscription Management Registration” window, select No, I prefer to register at a later time
and click Finish .
17. Configure the language and click Next ➙ Next .
18. Set your user name and the password (if needed) and click Next .
48
ThinkServer TD350 Operating System Installation Guide