Lenovo ThinkServer TD350 Installation Manual Download Page 117

Page: 117 / 122

make install

Notes:

• If the file extension is not .tar.gz, skip the second command.

• In the command lines,

e1000e

represents the driver name.

x.x.x.x

represents the driver file version.

Use the corresponding file name on your server.

4. Restart your server.

5. Click

System

. Then, select

Network Connections

in the

Preferences

area. The Ethernet card list is

displayed.

6. Select the Ethernet card that you want to configure. Then, click

Edit

7. Click

Ipv4 Settings

, and then select

Manual

from the

Method

drop-down list box.

8. Click

Add

to configure the IP in the

Address

area. Then, click

Apply

. Your server restarts.

9. Repeat the previous steps to configure other Ethernet cards.

Installing the driver for the Avago 9286 CV-8e HBA card

To install the driver, do the following:

1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder. The

most up-to-date device drivers for various server models are always available for download on the
Lenovo Web site at:

http://www.lenovo.com/drivers

2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device

to your server.

3. Log in to the operating system and copy the folder from your USB storage device to the

/tmp

Summary of Contents for ThinkServer TD350



























































































































Search results

Summary of Contents for ThinkServer TD350

Reviews:

Related manuals for ThinkServer TD350

Brands by name

Popular brands

Lenovo ThinkServer TD350, Installation Manual

Search results

Summary of Contents for ThinkServer TD350

Reviews:

Related manuals for ThinkServer TD350

Brands by name

Popular brands