Lenovo ThinkServer TD350 Installation Manual Download Page 112

Page: 112 / 122

2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device

to your server.

3. Use the

Pnputil-i-a <driverinf>

command to install the driver, for example:

e:
cd Management
Pnputil –i –a arcsas.inf

Note:

In the command lines,

represents the drive letter of your USB storage device,

Management

represents the subdirectory where your driver is located, and

arcsas.inf

represents the driver name. Use

the corresponding file name on your server.

4. Restart your server after the installation is completed.

Installing drivers for the SUSE Linux Enterprise Server operating system

This topic provides instructions on installing drivers for the SUSE Linux Enterprise Server operating system.

Note:

Your server comes with a chipset driver pre-installed. You do not need to install the chipset driver

manually.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:

1. Download the driver for the onboard graphics card from the Lenovo Web site. If the driver is a

compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect the
USB storage device to your server.

2. Log in to the operating system and copy the folder from your USB storage device to the

/tmp

Summary of Contents for ThinkServer TD350



























































































































Search results

Summary of Contents for ThinkServer TD350

Reviews:

Related manuals for ThinkServer TD350

Brands by name

Popular brands

Lenovo ThinkServer TD350, Installation Manual

Search results

Summary of Contents for ThinkServer TD350

Reviews:

Related manuals for ThinkServer TD350

Brands by name

Popular brands