![background image](http://html.mh-extra.com/html/lenovo/thinkserver-td350/thinkserver-td350_installation-manual_203020073.webp)
Note:
If the operating system is installed on a SAN, ensure that you select the drive on the SAN in the
following steps.
• To create a drive partition, do the following:
a. Click
Partitioning
and select
Custom Partitioning (for experts)
. Click
Next
.
b. In the Expert Partitioner window, select
Hard Disks
➙
sda
in the
System view
area, and then
click
Add
.
c. In the
New Partition Size
window, select
Custom Size
and type 20GB in the
Size
area, and then
click
Next
.
d. In the
Format partition
area, select
Ext3
from the
File System
drop-down list box.
e. In the
Mounting partition
area, select the forward slash
/
from the
Mount Point
drop-down list
box. Then, click
Finish
. The root partition is created.
f. Go back to the Expert Partitioner window. Select
Hard Disks
➙
sda
in the
System view
area, and
then click
Add
.
g. In the
New Partition Size
window, select
Custom Size
and type 1GB in the
Size
area, and then
click
Next
.
h. In the
Format partition
area, select
FAT
from the
File System
drop-down list box.
i. In the
Mounting partition
area, select
/boot/efi
from the
Mount Point
drop-down list box. Then,
click
Finish
. The boot partition is created.
j. Go back to the Expert Partitioner window. Select
Hard Disks
➙
sda
in the
System view
area, and
then click
Add
.
k. In the
New Partition Size
window, select
Custom Size
and type 1GB in the
Size
area, and then
click
Next
.
• In the
Format partition
area, select
Swap
from the
File System
drop-down list box. In the
Mounting
partition
area, the item becomes to
Swap
automatically in the
Mount Point
drop-down list box.
Then, click
Finish
. The swap partition is created.
10. Go back to the Expert Partitioner window. Ensure that the drive partition is correct and click
Accept
.
11. In the Installation Settings window, click
Software
to select your desired software programs, and then
click
OK
. If the YaST window is displayed, click
Accept
.
12. Click
Install
to install the software programs that you have selected.
Note:
If the warning window is displayed, configure the settings as you need, and then click
OK
and
TryAgain
. If the YaST window is displayed, click
Accept
. Then go back to the Installation Settings
window and click
Install
. If the YaST2 window is displayed, click
Install
.
13. The setup process continues after the server restarts. Set your root user password and click
Next
. If the
YaST2 window is displayed, click
Yes
.
Note:
The password must contain at least six characters and consist of upper case letters, lower case
letters, and numbers.
14. Set your host name and domain name. Then, click
Next
.
15. Configure your network in the Network Configuration window. Then, click
Next
.
16. In the Test Internet Connection window, configure the settings as you need. Then, click
Next
. The
following steps are based on the scenario that
No. Skip This Test
is selected in this step.
17. In the Network Services Configuration window, click
Next
.
18. In the User Authentication Method window, configure the settings as you need. Then, click
Next
. The
following steps are based on the scenario that
Local (/etc/passwd)
is selected in this step.
19. In the New Local User window, configure the settings as you need. Then, click
Next
.
20. In the Release Notes window, click
Next
.
.
Installing an operating system in UEFI mode
67
Summary of Contents for ThinkServer TD350
