Lenovo ThinkServer TD350, Installation Manual

Page: 77 / 122

• If your SATA configuration is set as AHCI or IDE, select Installation , and then press Enter.
• If the operating system is to be installed on SAN, do the following:
a. Select Installation .
b. Press E to enter editing mode. Then input
dud=1
and press F10.
c. After the driver is loaded, press Enter. If the “Please choose the Driver Update medium” window is
displayed, select Back .
3. In the Language, Keyboard and License Agreement window, select your language and keyboard layout
and then select I Agree to the License Terms . Click Next .
Note: In the License Agreement window, click OK if a prompt dialog box is displayed.
4. If the Network Settings window is displayed, configure the network settings and click Next .
Notes: If the operating system is to be installed on the SAN through an iSCSI card, the Disk Activation
window is displayed. Do the following:
a. Click Configuration ISCSI Disks .
b. Ensure that the ISCSI configuration information is correct and then click OK .
c. Click Next .
5. In the Registration window, configure the information as prompted and click Next . The following steps
are based on the scenario that Skip Registration is selected in this step.
6. In the Add On Product window, select add-ons to be installed and click Next . The following steps are
based on the scenario that default options are selected in this step.
7. In the Suggested Partitioning window, use the suggested partitioning method and click Next . If you want
to create a drive partition, do one of the following:
• Manually create a root partition (/)
a. Click Create Partition Setup and select Custom Partitioning (for experts) . Click Next .
b. In the Expert Partitioner window, select Hard Disks from System view . Then select the disk (for
example, sda ) for installing the operating system and click Add .
c. In the New Partitions Size window, select Custom Size .
d. Type the amount of space (for example, 80 GB) in the Custom Size field and then click Next .
e. Select Operating System from Role .
f. In the Formatting Options area, select BtrFS from the File system drop-down list box.
g. In the Mount partition area, select the forward slash (/) from the Mount Point drop-down list box.
h. Click Finish .
• Manually create a boot partition (/boot/efi)
a. In the Expert Partitioner window, select Hard Disks from System view . Then select the disk (for
example, sda ) for installing the operating system and click Add .
b. In the New Partitions Size window, select Custom Size .
c. Type the amount of space (for example, 2 GB) in the Custom Size field and then click Next .
d. Select Operating System from Role .
e. In the Formatting Options area, select FAT from the File System drop-down list box.
f. In the Mounting partition area, select /boot/efi from the Mount Point drop-down list box.
g. Click Finish .
• Manually create a swap partition
Chapter 3
.
Installing an operating system in UEFI mode
71