Lenovo ThinkServer TD350, Installation Manual

Page: 51 / 122

b. Select Standard Partition and then click Create .
c. In the Add Partition window, select the forward slash (/) from the Mount Point drop-down list box.
d. Select Ext4 from the File System Type drop-down list box.
e. In the Allowable Drives window, select the hard disk drive on which you want to install the
operating system.
f. Type the amount of space (in MB) in the New Partitions Size window and then click OK .
• Manually create a boot partition ( /boot in legacy mode) or ( /boot/efi in UEFI mode)
To create a boot partition, do the following:
a. Click Create . The Create Storage window is displayed.
b. Select Standard Partition and then click Create .
c. In the Add Partition window, select /boot/efi (or select /boot in Legacy mode) from the Mount
Point drop-down list box.
d. Select EFI System Partition (or select Ext4 in Legacy mode) from the File System Type drop-
down list box.
e. In the Allowable Drives window, select the storage device on which you want to install the
operating system.
f. Type the amount of space (in MB) in the New Partitions Size window and then click OK .
• Manually create a swap partition
To create a swap partition, do the following:
a. Click Create . The Create Storage window is displayed.
b. Select Standard Partition and then click Create .
c. In the Add Partition window, select swap from the File System Type drop-down list box.
d. In the Allowable Drives window, select the hard disk drive on which you want to install the
operating system.
e. Type the amount of space (in MB) in the New Partitions Size window and then click OK .
Go back to the Partitioner window, the created root partition, boot partition, and swap partition are
displayed. Click
Next . The drive partition is finished.
13. In the Format Warnings window, click Format to format the hard disk drive.
14. In the “Writing storage configuration to disk” window, click Write changes to disk .
15. In the “Boot loader operating system list” window, click Next .
16. The default installation is a basic server installation. You can customize your server by selecting a
different set of software from the software list or adding additional repositories that you want to use for
the software installation. Select
Customize now . Then, click Next . The installation process begins.
Note: When a warning window is displayed, select the option of your choice and then continue with the
installation.
17. After the installation is completed, click Reboot to restart your server.
Installing the Red Hat Enterprise Linux 6.10 operating system
This topic provides instructions on how to install the following operating systems:
• RedHat Enterprise Linux 6.10 (x86)
• RedHat Enterprise Linux 6.10 (x64)
To install the Red Hat Enterprise Linux 6.10 operating system, do the following:
Chapter 2
.
Installing an operating system in legacy mode
45