Lenovo ThinkServer RD550 User Manual And Hardware Maintenance Manual Download Page 22

Page: 22 / 192

Power supply

• One or two 550-watt hot-swap redundant power supplies (Universal input and compliant with 80 PLUS

Platinum)

• One or two 750-watt hot-swap redundant power supplies (Universal input and compliant with 80 PLUS

Platinum)

• One or two 750-watt hot-swap redundant power supplies (Universal input and compliant with 80 PLUS

Titanium)

• One or two 1100-watt hot-swap redundant power supplies (Universal input and compliant with 80

PLUS Platinum)

Notes:

• For 550-watt, 750-watt, or 1100-watt Platinum power supply: 90 - 264 V ac

• For 750-watt Titanium power supply: 180 - 264 V ac

System fans

Your server supports up to eight hot-swap system fans with redundancy. This design helps you to avoid
significant cooling problems when a system fan fails. You can replace a hot-swap system fan without
turning off the server.

ThinkServer RD550 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD550

































































































































































































Search results

Summary of Contents for ThinkServer RD550

Reviews:

Brands by name

Popular brands

Lenovo ThinkServer RD550, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD550

Reviews:

Brands by name

Popular brands