Lenovo ThinkServer RD550, User Manual And Hardware Maintenance Manual

Page: 161 / 192

5. Remove the old coin-cell battery.
Figure 128. Removing the coin-cell battery
6. Install a new coin-cell battery.
Figure 129. Installing the coin-cell battery
7. If you have lifted up the riser card assembly, reinstall it into the chassis. See “Replacing the riser
card assembly” on page 143.
8. Dispose of the old coin-cell battery as required by local ordinances or regulations.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 152.
Note: After you replace the system board battery, you must reset passwords, reset system date and time,
and reconfigure the server. See Chapter 5 “Configuring the server” on page 47.
For service technician only: replacing the system board
Attention: This procedure must be performed only by trained service personnel of Lenovo. Do not open your server or
attempt any repair before reading and understanding “Safety information” on page iii and “Guidelines” on page 59.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
Chapter 6
.
Replacing hardware
147