Lenovo ThinkPad Yoga 260, User Manual

Page: 143 / 174

8. Install the screw to secure the M.2 solid-state drive.
9. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 123.
10. Turn the computer over again. Connect the ac power adapter and all cables to the computer.
Replacing a memory module
Before you start, print these instructions. Read the important safety information first. See “Important
safety information” on page vi.
Increasing memory capacity is an effective way to make programs run faster. You can increase memory
capacity by replacing or adding a memory module.
Note: The operating speed of the memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. Static electricity could damage the memory module.
To replace a memory module, do the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Disable the built-in battery. See “Disabling the built-in battery” on page 119.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See “Replacing the base cover assembly” on page 123.
Chapter 10
.
Replacing devices
127