5. Open the latches on both sides of the memory slot at the same time
1
, and then remove the memory
module
2
.
6. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Then insert the memory module
1
into the slot at an angle of about 20 degrees. Pivot the memory
module downward until it snaps into place
2
. Ensure that the memory module is firmly installed in
the slot and cannot be moved easily.
Attention:
Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
7. Reinstall the base cover assembly. See “Replacing the base cover assembly” on page 113.
8. Reinstall the removable battery. See “Replacing the removable battery” on page 110.
9. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing an M.2 wireless WAN card
Note:
The following information is only for the user-installable modules.
Before you start, print these instructions. Read the Important safety information first, see “Important safety
information” on page vi.
118
User Guide
Summary of Contents for ThinkPad T450
