Lenovo ThinkPad T450, User Manual

Page: 107 / 187

Desktop Management Interface
The UEFI BIOS of your computer supports an interface called System Management BIOS (SMBIOS)
Reference Specification, version 2.7.1. SMBIOS provides information about the hardware components of
your computer. It is the responsibility of the UEFI BIOS to provide information about itself and the devices on
the system board. This specification documents the standards for getting access to this BIOS information.
Preboot eXecution Environment
The Preboot eXecution Environment (PXE) technology makes the computer more manageable by enabling
the computer to start from a server. Your computer supports the personal computer functions that PXE
requires. For example, with the appropriate LAN card, your computer can be started from the PXE server.
Note: The Remote Initial Program Load (RIPL or RPL) function cannot be used with your computer.
Wake on LAN
The network administrator can turn on a computer from a management console by using the Wake on
LAN feature.
When the Wake on LAN feature is enabled, many operations, such as data transfer, software updates, and
Flash updates of the UEFI BIOS, can be done remotely without remote attendance. The updating process
can perform after normal working hours and on weekends, so that the users are not interrupted during work,
and the LAN traffic is kept to a minimum. It saves time and increases productivity.
Note: If the computer is turned on through Wake on LAN, the computer starts follow the Network Boot
sequence.
Asset ID EEPROM
The Asset ID EEPROM contains information about the computer configuration and the serial numbers of
the key components. It also includes a number of blank fields where you can record information about
the end users in your network.
Setting management features
To enable a network administrator to remotely control your computer, set the following system-management
features in the ThinkPad Setup program:
• Wake on LAN
• Network Boot sequence
• Flash update
Note: If a supervisor password has been set, you will be required to enter the supervisor password when
you start the ThinkPad Setup program.
Enabling or disabling the Wake on LAN feature
When the Wake on LAN feature is enabled and the computer is connected to a LAN, the network administrator
can start the computer remotely from a management console, using a remote network-management program.
To enable or disable the Wake on LAN feature, do the following:
1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 77.
2. Select Config ➙ Network . The Network submenu is displayed.
3. Select a corresponding option for the Wake on LAN feature.
4. Press F10. A Setup Confirmation window is displayed. Click Yes to save the configuration and exit
the ThinkPad Setup program.
Chapter 6
.
Advanced configuration
91