Lenovo ThinkCentre M83, Hardware Maintenance Manual

Page: 128 / 308

2. Note the orientation of the socket cover, and install one side of the socket cover into the microprocessor
socket. Carefully press the other side of the socket cover downward until the socket cover snaps
into position.
Note: Your microprocessor socket and cover might look slightly different from the illustration.
Figure 54. Installing the microprocessor socket cover
3. Carefully check the four corners of the socket cover to ensure that the cover is secured.
4. Follow any additional instructions that are included with the replacement part you received.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 156.
Installing or replacing the mSATA solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 “Safety information” on page 1.
This section provides instructions on how to install or replace the mSATA solid-state drive.
Note: The mSATA solid-state drive is only available in some models. For new installation, see “Installing the
mSATA solid-state drive” on page 120. For replacement, see “Replacing the mSATA solid-state drive” on
page 122.
Installing the mSATA solid-state drive
To install the mSATA solid-state drive, do the following:
120
ThinkCentre M83 and M93/p Hardware Maintenance Manual