Lenovo ThinkCentre M720, Manual, Page: 96 / 222

22
Loading specialty paper
Follow these guidelines when loading specialty paper:
Note: If you are using letter size paper, adjusting the paper
guide may not be necessary.
Note: Make sure you select the correct paper size and paper
type in Print Properties. For help, see “Using Print
Properties” on page 16.
Load up to Make sure
100 sheets of inkjet
paper (depending on the
thickness) • The print side is facing you.
• The paper is against the right side of the paper
support.
25 iron-on transfers • The print side (blank side) is facing you.
• The paper guide rests against the edge of the
iron-on transfers.
• You follow the loading instructions on the iron-on
transfer packaging.
25 sheets of photo/glossy
paper • The glossy or coated side is facing you.
• If your paper includes instructions, read them
carefully.
• You load the photo paper vertically against the
right side of the paper support.
• The paper guide rests against the edge of the
photo paper.
• You use photo paper that is made for inkjet
printers.
Note: To prevent smudging, remove each photo as it
exits the printer, and then let it dry before stacking.
10 transparencies • The rough sides of the transparencies are facing
you.
• The paper guide rests against the edge of the
transparencies.
Note: Since transparencies and photos require more
drying time, we recommend that you remove each
transparency or photo as it exits and allow to dry to
avoid ink smearing.