Lenovo ThinkCentre M720, Manual, Page: 82 / 222

8
Setting up the All-In-One with a computer
To set up your All-In-One, follow the instructions on the Lenovo M720
Setup sheet to install the hardware and software. If problems occur during
the setup process, see “Troubleshooting” on page 55.
Setting up the All-In-One without a computer
If you are using your All-In-One without a computer, make sure you follow
the steps on the Setup sheet to complete hardware installation. Continue
with the following steps to optimize print quality.
1
Make sure you have loaded paper into the paper support, and then
press and hold Scan for three seconds. For help, see “Using the
control panel” on page 11.
A page prints.
2
Place the printed page onto the scanner glass.
3
Press Scan. For help, see “Using the control panel” on page 11.
Once scanning is complete, your print cartridges have been aligned
for optimal print quality.
1 2 3