Lenovo ThinkAgile HX2320 Appliance User Manual Download Page 40 | Manualshive

Page: 40 / 100

background image

Complete the following steps to enable the management of the ThinkAgile HX2320 Appliance and HX2321
Certified Node servers by Lenovo XClarity Administrator:

Step 1. Access Lenovo XClarity Administrator.

Information about accessing the Lenovo XClarity Administrator is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/setup_accesslxca.html

Step 2. Perform the initial setup of Lenovo XClarity Administrator.

Information about performing initial setup is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/setup_configurelxca.html

Step 3. Manage the ThinkAgile HX2320 Appliance and HX2321 Certified Node servers.

Information about managing servers from Lenovo XClarity Administrator is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/server_manage.html

Step 4. Optionally, add the rack to Lenovo XClarity Administrator that manages the ThinkAgile HX2320

Appliance and HX2321 Certified Node servers.

Information about adding rack views to Lenovo XClarity Administrator is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/racks_manage.html

Step 5. Add the ThinkAgile HX2320 Appliance and HX2321 Certified Node firmware packages to the

Lenovo XClarity Administrator firmware repository.

From the Lenovo XClarity Administrator Web interface, you can download, install, and manage
firmware updates for managed ThinkAgile HX2320 Appliance and HX2321 Certified Node servers.
To update the firmware:

1. Obtain the firmware update from the HX Best Recipe page.

https://support.lenovo.com/us/zh/solutions/ht505413

2. Follow these instructions to import the firmware update into the repository.

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/update_acquirefw.html

Step 6. Create server patterns for the ThinkAgile HX2320 Appliance and HX2321 Certified Node servers.

A server pattern represents pre-OS server configuration, including local storage, I/O adapter, SAN
boot, and other baseboard-management-controller and UEFI firmware settings. Server patterns
also integrate support for virtualizing I/O addresses so that you can virtualize server fabric
connections or repurpose servers without disruption. A server pattern is used as an overall pattern
to quickly configure multiple servers at one time.

You can create a server pattern that could be applied to all of the ThinkAgile HX2320 Appliance and
HX2321 Certified Node in the cluster.

Note:

Consider creating the server pattern from an existing server to save time.

Information about creating a server pattern is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/server_addserverpattern.html

36

User Guide for ThinkAgile HX2320 Appliance and HX2321 Node

«
...
38
39
40
41
42
...
»

Summary of Contents for ThinkAgile HX2320 Appliance





































































































Reviews:

No comments

Related manuals for ThinkAgile HX2320 Appliance

Brand: TANDBERG Pages: 187

Brand: Cabletron Systems Pages: 93

Brand: Omega Pages: 49

Brand: Iwatsu Pages: 338

Brand: Avaya Pages: 119

Brand: Portwell Pages: 21

Brand: BlueNet Video Pages: 38

C12C823912 - Net 2 Print Server

Brand: Epson Pages: 20

C823622A - Interface Type B Print Server

Brand: Epson Pages: 3

C12C800WN (Net 802.11b Wireless Print Server)

Brand: Epson Pages: 2

C32C824461 - UB R03 Print Server

Brand: Epson Pages: 86

Brand: Epson Pages: 279

C823622A - Interface Type B Print Server

Brand: Epson Pages: 2

8-BAY RACKMOUNT NAS

Brand: Seagate Pages: 20

BlackArmor NAS 420

Brand: Seagate Pages: 64

Brand: MRV Communications Pages: 65

Brand: Allnet Pages: 118

InfiniteStorage 3000

Brand: Silicon Graphics Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands