Lenovo ThinkAgile HX2320 Appliance User Manual Download Page 10

Page: 10 / 100

Table 1. Server specifications (continued)

Specification

Description

System fans

• One processor: five dual-rotor hot-swap fans (including one redundant fan rotor)

• Two processors: seven dual-rotor hot-swap fans (including one redundant fan rotor)

Notes:

• For server models installed with Intel Xeon 6144, 6146, 6154, 8168, 8180, and 8180M

processors, fan rotor redundancy function is not supported. If one fan rotor fails, the server
performance will be degraded.

• If your server comes with only one processor, five system fans (fan 1 to fan 5) are adequate to

provide proper cooling. However, you must keep the locations for fan 6 and fan 7 occupied by a
fan filler to ensure proper airflow.

Power supplies

One or two hot-swap power supplies for redundancy support

• 550-watt ac 80 PLUS Platinum

• 750-watt ac 80 PLUS Platinum

• 750-watt ac 80 PLUS Titanium

• 1100-watt ac 80 PLUS Platinum

User Guide for ThinkAgile HX2320 Appliance and HX2321 Node

Summary of Contents for ThinkAgile HX2320 Appliance





































































































Search results

Summary of Contents for ThinkAgile HX2320 Appliance

Reviews:

Related manuals for ThinkAgile HX2320 Appliance

Brands by name

Popular brands

Lenovo ThinkAgile HX2320 Appliance, User Manual

Search results

Summary of Contents for ThinkAgile HX2320 Appliance

Reviews:

Related manuals for ThinkAgile HX2320 Appliance

Brands by name

Popular brands