Lenovo 7X69, Setup Manual

Page: 131 / 172

After installing the M.2 backplane, complete the following steps:
1. Reinstall the PCIe riser card if necessary (see “Install the PCIe riser card assembly” on page 114 ).
2. Reinstall the LOM adapter if necessary (see “Install the LOM adapter” on page 118 ).
3. Install the PCIe expansion tray (see “Install the PCIe expansion tray” on page 124 ).
4. Install the top cover (see “Install the top cover” on page 128 ).
5. Reconnect the power cords and any cables that you removed.
6. If the server is installed in a rack, reinstall the server into the rack.
7. Power on the server and any peripheral devices.
Install the chassis air baffle
Use this procedure to install the chassis air baffle.
Before installing the chassis air baffle:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 56 ).
To install the chassis air baffle, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=
PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
.
Figure 89. Chassis air baffle installation
Step 1. Align the chassis air baffle with the slots on both sides of the chassis, and lower it into the server.
Step 2. Slightly press the chassis air baffle, make sure it is fully secured.
After installing the fan cage assembly, complete the following steps:
Chapter 3
.
Server hardware setup
123